Features and Benefits of the MaxJax
It's the features you get that set the MaxJax apart from the rest. Every MaxJax unit is loaded with the right features that make it the best choice when looking for a new auto lift. Read through the long list of features this car lift has to offer and you'll easily come to the conclusion that the MaxJax is no ordinary garage lift.
Works like magic
A cast iron gear flow divider is the heart of the MaxJax™ system, providing precisely equalized lifting. The specially designed flow divider/combiner is a positive-displacement fluid control device with precise flow division of hydraulic power from one column to the other even if load balance pressures change.
Mobile power unit cart
Our standard mobile power unit cart is small enough to be stored out of the way and features a storage area for the hydraulic hoses. The hydraulic power unit uses a dual voltage single-phase motor that requires 115 volts AC and a 25 amp breaker, or 208-230 volts AC and a 30 amp breaker. The industrial grade power cord is 6-Ft. long. A simple push-button switch raises the lift and a push lever controls the lowering. Simple quick-disconnect hoses can be positioned easily for single or dual column operation.
Optional power unit station
An optional power unit station with integrated lift controls and spring-rewind hose reels helps keep your work area organized and tidy. Mount the hose reels at the front wall of your garage or overhead for the ultimate in garage efficiency. Hydraulic lift controls can be located to best suit your needs and provide a central location to safely and easily operate the lift. NOTE: This product is currently in production.
Clear undercar access
No other low-rise or mid-rise lift system provides more undercar clearance and unobstructed floor space than the MaxJax™ lilting system. Now you can easily access engine undersides, transmissions, drive-shafts, starters, differentials or anything else requiring undercar access.
Portability
A two-post car lift with built-in wheels that allows you to use the lift when you need it, then conveniently store it out of the way when not in use keeping your garage and vehicle lanes clutter-free.
From stowed to go in less than 15-minutes
Internally threaded recessed drop-in anchors and quick connect/disconnect hydraulic couplers provide for fast and simple set-up. NOTICE - Before drilling into post-tension garage floors, always consult a building engineer for determining cable locations and where to avoid drilling.
Two-lifts-in-one
Our optional motorcycle adapter kit allows you to safely lift motorcycles, ATV's or other motorized vehicles to a comfortable working height.
Adjustable lifting arms & stackable adapters
Increases overall arm positioning for lifting a variety of different vehicles that have Uni-body construction, OEM recommended pick-up points, or wide and/or narrow frame configurations.
Low-profile arms
fit under the lowest compact and sport vehicles or custom motorcycles with lowered frames
Automatic arm restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear type arm restraints automatically disengage to provide easy positioning of the lift arms.
Maintenance-free load bearings
Rather than using roller bearings that need constant lubrication and maintenance, we use futuristic full-floating UHMW ultra-high molecular weight polyethylene load bearings that never need lubrication and last virtually the life of the lift.
Single-piece columns
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Dual Direct-Drive technology
By utilizing two low-pressure HVLP Direct-Drive cylinders, we've eliminated the need for lifting chains or screw mechanisms most commonly found on other lift designs. HVLP Direct-Drive technology offers better reliability, smoother operation and less maintenance
Solid steel safety lock bars
Our rugged safety lock bars are capable of holding three-times the rated lifting capacity making sure your vehicles are safely elevated and remain secure.
Detailed safety instruction
Included with every lift are detailed installation and maintenance instructions, graphic safety and maintenance decals.
MaxJax™ Warranty
The MaxJax™ Lifting System comes with an unprecedented 24-month limited warranty on lift structure and other lift components and a 12-month warranty on the power unit and hydraulic cylinders, and other assembly components. For more information, see our warranty details.
Wide or narrow installation
The lift can be installed at a width that suits the vehicles you will be raising. You may even choose to install additional anchors at varied column positions for adaptability to multiple vehicle configurations.
Industrial-grade hydraulic cylinders
Integrated into every MaxJax™ hydraulic cylinder is a one-piece, pilot fitted, machined steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life.
High-speed hydraulics
Free-flow, high-pressure 3/8" hydraulic lines and a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for increased productivity..
Durable powder coat finish
Every MaxJax™ lift features a durable powder coat finish that gives the metal a high-quality, extremely durable finish which withstands even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process.
Safety Features from the Ground Up
The MaxJax™ lifting system is designed with safety in mind. Dannmar's 10-years of lift building know-how and dedication to craftsmanship and our use of only high grade materials is what makes the MaxJax™ lifting system one of the safest lifts on the market.
No one in the industry has a more sophisticated and comprehensive research and quality control program than Dannmar, and our thousands of customers worldwide prove it.
Low-pressure HVLP Direct-Drive cylinders eliminate the need for lifting chains or screw mechanisms most commonly found on other lift designs.
Hydraulic cylinders feature integrated velocity-fuse safety valves.
A cast iron gear flow divider provides precisely equalized lifting for uniform division of hydraulic power.
Rugged safety lock bars are capable of holding three-times the rated lifting capacity.
Arm restraints automatically engage each time the lift is raised.
Detailed installation, maintenance and safety instructions accompany each MaxJax™ lifting system.
Dannmar encourages all owners to know their equipment and to follow good safety practices when using any of our products. Your MaxJax™ system equipment has been designed and built with your safety in mind, but the ultimate responsibility for safe operation is with you, the operator.
Copyright © 2009 Dannmar. All rights reserved.